Very good oil and grease resistance. Limited resistance to acids, solvents, and alkaline solutions. This belt has very good product release and is easy to clean. Tight fibers minimize wicking. Excellent choice for food applications where staining is a problem. The tan color hides stains from poultry products.

Excellent oil and grease resistance. Very good resistance to acids and solvents but avoid high concentrations. Ozone resistant. Tough, highly abrasive, cut and wear resistant compound acts like urethane in terms of durability and wear. Excellent in corrugated box plants and for handling sharp metal parts on inclines/declines. For laces, a recessed cover is recommended.

Avoid oil, grease and solvents. Belt lays flat with no edge curl. This belt has a low coefficient of friction, low stretch and is easy to track. The spun polyester wrap offers low noise, long wear life and improved abrasion resistance at high speeds. Uses include light-duty package handling applications, diverters and merge systems.

Avoid oil, grease and solvents. Belt lays flat with no edge curl. Low modules for tracking short, wide conveyors (requires 5 lbs./in. tension/load for 1/2% stretch). Low friction -- ideal for high speed systems. Uses: short, wide, high speed package handling, stop/start applications, check weighing and indexing.

Avoid oil, grease and solvents. Spun polyester offers lower noise and better abrasion resistance than filament polyester for boxes and luggage. Uses include: belt on roller and slide bed applications for packages.

Avoid oil, grease, and solvents. Belt lays flat with no edge curl. Low stretch and low friction make it ideal for high speed slider beds. Requires low voltage. Excellent fastener holding. Ideal for airports and package handling/sorting/diverting applications. Often used as merge belts. Works well on short center conveyors.

Commonly used in logistics. Backing reduces noise as well as HP required to drive traditional interwoven belts. Flame retardant per ASTMD 378-10 standards.

Low stretch, quiet running with very good resistance to oils. Excellent belt for general conveying, diverting, and merging applications in logistics and warehousing applications. Fire resistant to ASTM D 378.

Low stretch, quiet running with very good resistance to oils. Excellent belt for general conveying, logistic and warehousing applications. This belt is commonly used in horizontal applications including metering conveyors. Outstanding choice for troughing scenarios. Fire resistant to ASTM D 378.

Very good resistance to oil as it absorbs fluids without impacting belt performance. Limited resistance to acids and solvents, especially in high concentrations. This belt is anti-static, has low stretch, low coefficient of friction, good cut resistance, absorbs shock and is quiet-running. Excellent choice for package handling, sorting in warehouses as well as airports and automotive stamping on transfer lines. Not recommended for accumulation or diverting.

Very good resistance to oil as it absorbs fluids without impacting belt performance. Limited resistance to acids and solvents, especially in high concentrations. Belt is not flame retardant. This belt has low stretch, low coefficient of friction, good cut resistance, absorbs shock and is quiet-running. Proven performance on paper/tissue applications, in warehouses or airports, on transfer lines and in the tire/rubber industry. Not recommended for accumulation or diverting.

Avoid oils, greases and solvents. Treated carcass increases ply adhesion and decreases edge curl. Extra thick non-marking covers are very abrasion resistant. Soft criss-crossing ribs form diamond pattern. Handles some products up to 35 degrees. Good for lightweight, wax-coated or hard surfaced products. Used extensively in airports and package/parcel handling. For laces, a recessed cover is recommended.

Woven carcass eliminates ply separation. Ideal for use in fish processing, fruits and vegetables, and bulk food products.

Ziplink belting can be installed without expensive tooling or the need for prolonged downtime. Ziplink belts are common throughout the corrugated industry. The splice area as flat and seamless which nearly mirrors a truly endless belt at a fraction of the cost. Smooth Carboxylated Nitrile is an excellent choice for applications which require some accumulation and demand high wear characteristics from the belt.

Ziplink belting can be installed without expensive tooling or the need for prolonged downtime. Ziplink belts are common throughout the corrugated industry. The splice area as flat and seamless which nearly mirrors a truly endless belt at a fraction of the cost. The Carboxylated Nitrile roughtop surface is the premium surface for abrasive applications that still require grip against the product.

Ziplink belting can be installed without expensive tooling or the need for prolonged downtime. Ziplink belts are common throughout the corrugated industry. The splice area as flat and seamless which nearly mirrors a truly endless belt at a fraction of the cost. The soft brown Nitrile rough top is a non-marking surface that offers oil resistance as well as excellent product grip.

Ziplink belting can be installed without expensive tooling or the need for prolonged downtime. Ziplink belts are common throughout the corrugated industry. The splice area as flat and seamless which nearly mirrors a truly endless belt at a fraction of the cost. The soft natural rubber cover is ideal for demanding applications that require a belt to actively grip the product. This belt utilizes the entire surface as opposed to a profile for increased COF.