Limited oil and grease resistance. Good resistance to acids and solvents but avoid high concentrations. Belt tracks easily and is flexible in both directions. This belt is ideal for troughing conveyors. Other uses include can filling lines and the building material industry. The diamond bottom impression provides good drive on the pulley, yet low enough co-efficient of friction to operate on slider bed applications.

Moderate resistance to oils and greases. Good resistance to acids and solvents, except in high concentrations. Easy to track. Quiet running due to the special fabric on pulley side. The matte finish on the cover makes this an attractive belt, and is preferred by checkstand industry for groceries and all purpose retail goods.

Excellent oil and grease resistance, including coconut oil and cocoa butter. Limited resistance to acids, solvents, and alkaline solutions. Very good product release. Easy to clean. Proven performance handling confectionery and baked goods, especially on troughing conveyors or applications requiring flexibility in the width fibers.

Moderate oil and grease resistance. This belt stretches less than 2%. This is a thick yet very flexible belt that provides excellent fastener holding capabilities. The top cover has excellent abrasion/wear characteristics. This belt is considered the workhorse of our rough top belt line and is also priced very competitively.

Excellent animal and vegetable oil resistance. Good resistance to acids and solvents, except in high concentrations. Excellent appearance -- a fine OEM belt. Woven carcass eliminates ply sepqration. Stretches less than 2%. Proven performance handling red meat, fish, poultry, fried foods, nuts and snack foods. Because of top layer of monofilament, the belt lays flat and is easier to track than standard woven constructions.

The Dura Drive Plus one piece motorized pulley is compact yet powerful. All gearing is made of high-quality alloy steel ensuring years without breakdown. The Dura Drive Plus is also low maintenance with an in-place oil change after 40,000 hours. This ensures minimal downtime, which in turn ensures lower cost and higher productivity.

The Dura Drive Plus one piece motorized pulley is compact yet powerful. All gearing is made of high-quality alloy steel ensuring years without breakdown. The Dura Drive Plus is also low maintenance with an in-place oil change after 40,000 hours. This ensures minimal downtime, which in turn ensures lower cost and higher productivity.

The Dura Drive Plus one piece motorized pulley is compact yet powerful. All gearing is made of high-quality alloy steel ensuring years without breakdown. The Dura Drive Plus is also low maintenance with an in-place oil change after 40,000 hours. This ensures minimal downtime, which in turn ensures lower cost and higher productivity.

The Dura Drive Plus one piece motorized pulley is compact yet powerful. All gearing is made of high-quality alloy steel ensuring years without breakdown. The Dura Drive Plus is also low maintenance with an in-place oil change after 40,000 hours. This ensures minimal downtime, which in turn ensures lower cost and higher productivity.

The Dura Drive Plus one piece motorized pulley is compact yet powerful. All gearing is made of high-quality alloy steel ensuring years without breakdown. The Dura Drive Plus is also low maintenance with an in-place oil change after 40,000 hours. This ensures minimal downtime, which in turn ensures lower cost and higher productivity.

Avoid oil, grease and solvents. Treated carcass increases ply adhesion and decreases edge curl. Extra thick non-marking covers are very abrasion resistant. Soft criss-crossing ribs form a diamond pattern. Handles some products up to 35 degrees. Good for light-weight, wax-coated or hard-surfaced products. Used extensively in airports and package/parcel handling. For laces, a recessed cover is recommended.

Very good mineral and petroleum oil resistance. Good resistance to acids and solvents but avoid high concentrations. Fire resistance. Woven carcass eliminates ply separation. Stretches less than 2%. Proven performance handling light metal stampings and plastic parts. Also used in handling bagged fertilizer, agricultural harvesting, lumber and plywood, case sealers, and live roller applications. Inexpensive base belt for cleated belts. Best tracking on conveyors with 5:1 ratio (length:width).

Avoid oil, grease and solvents. Treated fabric increases ply/cover adhesion and decreases edge curl. Thick skims between the plies provide greater bulk and desired rigidity. Excellent for general warehouse applications. For laces, a recessed cover is recommended.

Excellent oil and grease resistance. Very good resistance to acids and solvents, but avoid high concentrations. Ozone resistant. Treated fabric increases ply/cover adhesion and decreases edge curl. Thick skims between the plies provide desired bulk. Ideal for use as an inexpensive, yet oil resistant, rough top for general duty inclines/declines. For laces, a recessed cover is recommended.

Excellent oil and grease resistance. Very good resistance to acids and solvents but avoid high concentrations. Ozone resistant. Tough, highly abrasive, cut and wear resistant compound acts like urethane in terms of durability and wear. Excellent in corrugated box plants and for handling sharp metal parts on inclines/declines. For laces, a recessed cover is recommended.

Excellent oil and grease resistance. Good resistance to acids, chemicals and hydrocarbon solvents. Woven carcass eliminates ply separation. The smooth, heavy polyurethane cover offers superior wear and resistance to cutting, gouging and abrasion in steel and applications. Best tracking on conveyors with 5:1 ratio (length:width).

Very good chemical resistance. Very smooth consistent top cover, excellent for metal stamping and recycling applications. Has very good chemical and oil resistance for those tough metal stamping applications.

Very good resistance to chemicals and oils, in moderate concentrations. The woven carcass provides strength and above average lace retention. The 85 durometer heavy cover is durable and resistant to cutting and abrasion. Ideal for handling wood chips - horizontal or trough. Also a good solution for metal or steel bending applications (i.e., stamping plants for vehicles and appliances).

Excellent oil and grease resistance. Good resistance to acids and chemicals. This is a tough polyurethane-covered belt which has aggressive applications for metal parts stamping, brick plants, wood chips and scraps, as well as glass/trash recycling. For laces, stainless steel is recommended.